VezAPI Image Upscaler API
VezAPI Image Upscaler API 的模型能力、计价规格、请求参数和接入示例。使用 VezAPI 账号密钥统一接入。
VezAPI Image Upscaler API 接入文档
使用 VezAPI 密钥接入 VezAPI Image Upscaler。下列操作共用同一个账号余额和鉴权方式。
图片放大在提交前按最高档每张 12 积分预留,最终按实际消耗扣分,未使用的预留会释放。
https://api.vezapi.com请求头使用 Authorization: Bearer YOUR_VEZAPI_KEY。每次提交使用唯一的 Idempotency-Key,查询同一笔提交时才复用。
VezAPI - 图片放大
/api/v1/jobs/createTask模型标识: kie/image-upscale
| 参数 | 类型 | 说明与限制 |
|---|---|---|
model必填 | string | 用于处理任务的模型名称。必填字段。 - 该接口必须使用 `kie/image-upscale` 模型 可选值: 默认: |
callBackUrl可选 | string | 接收处理任务完成通知的回调 URL。可选配置,生产环境建议使用。 - 任务处理完成后,系统会向该 URL 以 POST 方式推送任务状态和结果 - 回调内容包含处理后内容的 URL 及任务相关信息 - 你的回调接口需支持接收 POST 请求及 JSON 格式的请求体 - 也可选择调用任务详情接口,主动轮询任务状态 - 回调可能投递不止一次,请按 `taskId` 去重 - 为确保回调安全性,请参阅 [Webhook 校验指南](/cn/common-api/webhook-verification) 了解签名验证实现方法 |
input必填 | object | 放大任务的输入参数 |
input.image_url必填 | string | 待放大的图片地址。必填。 - 必须是公网可直接下载的 HTTP(S) URL - 最大文件大小:20 MB - 支持格式:JPG、PNG、WEBP、HEIC、BMP、GIF(只取第一帧) - 请使用上传后的文件 URL,而不是文件内容本身 |
input.upscale_factor可选 | string | 宽、高各自乘的放大倍率,保持比例。可选。取值:`"1"` / `"2"` / `"4"` / `"8"`(传数字也可以),默认 `"2"`。 - `1`:同尺寸画质增强(去噪、锐化、文字保真),不改变尺寸 - `2` / `4` / `8`:输出宽高 = 输入 × 倍率 - 输出不得超过 67 MP(约 8192×8192)且单边 ≤ 16,384 像素,否则返回 422 且不扣费 - 计费档位(2K / 4K / 8K)按输出总像素确定 可选值: 默认: |
请求示例
curl -X POST 'https://api.vezapi.com/api/v1/jobs/createTask' \
-H 'Authorization: Bearer YOUR_VEZAPI_KEY' \
-H 'Idempotency-Key: your-unique-request-id' \
-H 'Content-Type: application/json' \
-d '{
"model": "kie/image-upscale",
"input": {
"image_url": "https://example.com/input.png"
}
}'返回值与错误
HTTP 200
请求成功
| 参数 | 类型 | 说明与限制 |
|---|---|---|
code可选 | integer | Status code of the request. The HTTP status is 200 even when the request fails, so always check this field: 200 means success; any other value means the request failed and msg describes the reason. Common values: 401 invalid or missing API key; 402 insufficient credits; 429 rate limit exceeded; 422 or 500 the request could not be processed (read msg and check your parameters before retrying). 可选值: |
msg可选 | string | Response message, error description upon failure |
data必填 | object | |
data.taskId必填 | string | The task ID can be used with the "Get Task Details" endpoint to query the task status. |
HTTP 500
Server error.
| 参数 | 类型 | 说明与限制 |
|---|---|---|
code必填 | integer | Response status code - **200**: Success - Request has been processed successfully - **401**: Unauthorized - Authentication credentials are missing or invalid - **402**: Insufficient Credits - Account does not have enough credits to perform the operation - **404**: Not Found - The requested resource or endpoint does not exist - **408**: Timeout - No result has been returned for over 10 minutes. - **422**: Validation Error - The request parameters failed validation checks - **429**: Rate Limited - Request limit has been exceeded for this resource - **455**: Service Unavailable - System is currently undergoing maintenance - **500**: Server Error - An unexpected error occurred while processing the request - **501**: Generation Failed - Content generation task failed - **505**: Feature Disabled - The requested feature is currently disabled |
msg必填 | string | Response message, error description when failed |
data必填 | object |
任务状态与回调
异步任务请保存返回的 taskId。调用 GET /api/v1/jobs/recordInfo?taskId=... 查询,或在创建时设置 callBackUrl。只有任务所属账号可以查询任务或基于任务创建派生资源。
超时可能表示请求已经受理。请在控制台查看原请求,不要自动新建任务。回调可能重试并重复到达,请使用 X-VezAPI-Event-Id 去重。
文件、日志与计费
生成媒体通常随上游保留 14 天,上传文件在 24 小时后失效。请在过期前保存所需文件。VezAPI 仅流式转发已登记资源,不提供永久作品库。请求日志保留两个自然月。
调用前预留积分,最终按实际优惠扣分 1:1 结算。用量不明时暂停新付费请求。若保护其他任务预留后余额不足以结算,会保留待结算记录,补足余额后再扣费;模型用量不会将钱包扣成负数。按时长计价的输入文件由服务端读取时长,读取失败时不提交模型任务。
使用你的 VezAPI 密钥发送请求。成功生成将消耗账号积分。
/api/v1/jobs/createTask返回结果将在这里显示。
VezAPI Image Upscaler API 价格
下方费率为参考估算,最终按实际优惠扣分 1:1 结算。按标准充值包换算,1,000 积分约为 10 美元,大额充值包可降低每积分实际单价。
| 规格 | 积分 | 计价单位 | 美元参考 |
|---|---|---|---|
| VezAPI Image Upscale, image-upscale, 8K (≤67.11 MP) | 12 | 每张图片 | $0.12 |
| VezAPI Image Upscale, image-upscale, 4K (≤16.78 MP) | 4 | 每张图片 | $0.04 |
| VezAPI Image Upscale, image-upscale, 2K (≤4.19 MP) | 1.5 | 每张图片 | $0.015 |